SEKURE Paradox Digiplex DGP-610 Przewodnik Instalacji Pobierz pdf (Strona 53)

EVO Control Panel 49

4.1.5 Exit Confidential Mode

Section [009] Option [2]

Option [2] ON = Exit Confidential Mode by entering an access code.

Option [2] OFF = Exit Confidential Mode by pressing a button (default).

Option [2] must be set to ON on UL listed systems.

Option [2] will only work if option [1] is enabled.

4.1.6 Confidential Mode Timer

Section [012]

Section [012] determines the amount of time without action before the

keypad enters Confidential Mode. The Confidential Mode Timer can be set

from 005 seconds to 255 seconds. Default: 120 seconds

4.1.7 Muting

Section [009] Option [3]

Option [3] OFF = Audible sounds (default).

Option [3] ON = Mute.

4.1.8 Beep on Exit Delay

Section [009] Option [4]

Option [4] OFF = Exit Delay beep disabled.

Option [4] ON = Exit Delay beep enabled (default).

4.1.9 Chime on Zone Closure

Section [009] Option [5]

Option [5] OFF = Chime on Zone Closure disabled (default).

Option [5] ON = Chime on Zone Closure enabled.

4.1.10 Beep on Trouble

Section [010] Options [1] To [4]

System Troubles / Clock Loss

Option [1] OFF = Disabled (default).

Option [1] ON = Enabled.

Communicator Troubles

Option [2] OFF = Disabled (default).

Option [2] ON = Enabled.

Module / Communication Bus Troubles

Option [3] OFF = Disabled (default).

Option [3] ON = Enabled.

Zone Troubles

Option [4] OFF = Disabled (default).

Option [4] ON = Enabled.

4.1.11 Keypad Anti-tamper Enable

Section [011] Option [5]

Option [5] OFF = Keypad's anti-tamper is disabled (default).

Option [5] ON = Keypad's anti-tamper is enabled.

4.2 Programmable Output Options

4.2.1 PGM State

SECTION [011] OPTION [1]

The PGM is limited to 50mA.

Option [5] OFF = PGM is Normally Open (default).

Option [5] ON = PGM is Normally Closed.

4.2.2 PGM Activation Event

SECTION [014] to [017]

Enter the sections that correspond to the

EVENT GROUP, FEATURE GROUP,

START # and END # of the PGM and enter the required data.

4.2.3 PGM Deactivation Event

SECTION [018] to [021]

If the PGM Deactivation Option is set to follow the PGM Deactivation Event,

the PGM will return to its normal state when the event programmed in

sections [018] to [021] occurs. Enter the sections that correspond to the

EVENT GROUP, FEATURE GROUP, START # and END # of the PGM and enter

the required data.

4.2.4 PGM Deactivation Mode

SECTION [011] Option [2]

Option [2] OFF = Deactivation as per PGM Deactivation Event (default).

Option [2] ON = PGM will deactivate according to the PGM Timer.

4.2.5 PGM Base Time

SECTION [011] Option [3]

Option [3] OFF = PGM Base Time is 1 second (default).

Option [3] ON = PGM Base Time is 1 minute.

4.2.6 PGM Timer

SECTION [013]

To program the timer, enter a 3-digit decimal value (001 to 255) in section

[013].

4.2.7 PGM Test

SECTION [030]

Use this section to initiate a PGM test, which will activate the PGM for 8

seconds. Enter section [030] to activate this test.

Event group Feature group Start # End #

PGM [014] [015] [016] [017]

Event group Feature group Start # End #

PGM [018] [019] [020] [021]

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag

SEKURE Paradox Digiplex DGP-610 Przewodnik Instalacji Strona 53

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa SEKURE Paradox Digiplex DGP-610