SEKURE Paradox Spectra 1686H Instrukcja Instalacji Pobierz pdf (Strona 22)

20 REFERENCE & INSTALLATION MANUAL

5.6.2 STA NDA RD 24HR. FIR E ZONE

1728/EX:

Sections [001] to [005]: Zones 1 to 5, First Digit = 8

1738/EX:

Sections [001] to [007]: Zones 1 to 7, First Digit = 8

Whenever a Standard 24Hr. Fire Zone opens, whether it

is armed or disarmed, the control panel will generate the

following:

• The contr ol panel can send the corresponding Alarm

Report Code from sections [187] to [190].

• If a tamper/wiring fault occurs on a Fire Zone, the

control panel can send a Fire Loop Trouble report

code pr ogrammed in section [206] to the Central

Station. The keypads will display a Fire Loop Trouble

in their Tr oubl e Displa y (see page 46).

• Alarms are always audible regardless of other

settings. Fir e alarms generate an intermittent (pulsed)

bell/siren output signal as shown in Figure 5.3.

For information on how to connect smoke detector s to

the control panel, refer to Fire Circuits on page 10.

5.6.3 DELAYED FIRE ZONE

1728/EX:

Sections [001] to [005]: Zones 1 to 5, First Digit = 9

1738/EX:

Sections [001] to [007]: Zones 1 to 7, First Digit = 9

When a Delayed 24Hr. Fire Zone opens, whether it is

armed or disarmed, the control panel wi ll react as show n

in Figure 5.2. Delayed 24Hr. Fire Zones are commonly

used in residential homes where a smoke detector often

generates fal se al arms (i.e. burning bread, etc.).

If the ATZ feature is enabled when using any

type of Fire Zone, the control panel will disable the “doubled zone” (see Zo ne Doubling on

page 22).

Figure 5.3: Bell Output During Fire Alarm

5.7 ZONE PARTITION ASSIGNMENT

Sections [001] to [016]: Zones 1 to 16

The control panel provides the option of partitioning the security system into two completely independent systems.

As demonstrated in Figur e 5-1 on page 18, sections [001] to [016] represent zones 1 through 16 respectively, where

the second digit in each of these sections repr esents the zone's partition assignment. The zone is assigned to

Partition 1 if second digit = 1, Partition 2 if second digit = 2, or both partitions is second digit = 3. For details on

Partitioning, refer to page 39.

5.8 ZONE OPTIONS

As demonstrated in Figure 5.1, sections [001] to [016] represent zones 1 through 16 respectively. After entering the

first two digits, select one or more of the following Zone Options by using the Multiple Feature Select Programming

Method (see page 11):

Delayed Fire Zone

is triggered

Activate bell/siren output & delay

report transmission for 30 seconds.

Yes

Any key on

keypad pressed

within 30

seconds?

De-activate bell/siren output and

delay report transmission an

additional 90 seconds.

Problem

corrected?

Latch alarm and

transmit report code

END

Alarm Disabled

Yes

Problem

corrected within

30 seconds?

Yes

gure

aye

24H

one

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag

SEKURE Paradox Spectra 1686H Instrukcja Instalacji Strona 22

Komentarze do niniejszej Instrukcji