SEKURE DGP2-641 Instrukcja Instalacji Pobierz pdf (Strona 26)

24 R

EFERENCE

& I

NSTALLATION

ANUAL

7.15.2 No Exit Delay on Remote Arm

(Default = enabled) When a user arms by using a remote control from the

Omnia Wireless System (OMN-RCV3), the control panel will cancel the Exit

Delay and immediately arm the partition. Enable option [8] in the desired

section:

7.16 K

EYPAD

OCK

OUT

EATURE

(Default = 000) If a consecutive number of invalid codes are entered into a

keypad, the control panel can be set to lockout access from all the keypads

in the partition for a specified period. Program the number of consecutive

invalid codes from 001 to 255 (000 = disabled) into the desired section:

(Default = 000) Program the duration of the keypad lockout from 001 to 255

minutes into the desired section. Programming 000 into these sections will

not lockout the keypad, the control panel will transmit the Keypad Lockout

report code programmed in section [3937].

7.17 B

ELL

QUAWK

The control panel can activate the bell output briefly causing the bell or

siren to squawk to alert users that a partition is being armed, disarmed or

that an Entry or Exit Delay was triggered. Enable or disable the desired

option (off = disabled):

7.18 R

ING

BACK

After disarming the system, the control panel can warn the user that there

was an alarm and that it may be dangerous to enter by having the keypad

beep 10 times and/or by squawking the bell 10 times. The user should

leave immediately and contact the Monitoring Station from a secure

location. Select the section that corresponds to the desired partition and

enable or disable the desired option (off = disabled):

7.19 M

AXIMUM

YPASS

NTRIES

(Default = 000) The Maximum Bypass Entries feature limits the number of

zones that can be bypassed in each partition.

For example, program section [3115] with 010. When in Bypass

Programming (see section 16.6), the control panel will not let the user

bypass more than 10 zones in partition 1.

Enter any value between 001 and 096 (000 = no limit).

7.20 D

ISPLAY

“B

YPASS

” I

RMED

(Default = enabled) When option [5] is enabled, the keypads will not display

that zones have been bypassed while the system is armed.

Partition 1: [3125] Partition 3: [3325] Partition 5: [3525] Partition 7: [3725]

Partition 2: [3225] Partition 4: [3425] Partition 6: [3625] Partition 8: [3825]

Partition 1: [3105] Partition 3: [3305] Partition 5: [3505] Partition 7: [3705]

Partition 2: [3205] Partition 4: [3405] Partition 6: [3605] Partition 8: [3805]

Partition 1: [3106] Partition 3: [3306] Partition 5: [3506] Partition 7: [3706]

Partition 2: [3206] Partition 4: [3406] Partition 6: [3606] Partition 8: [3806]

Partition 1: [3124] Partition 3: [3324] Partition 5: [3524] Partition 7: [3724]

Partition 2: [3224] Partition 4: [3424] Partition 6: [3624] Partition 8: [3824]

Option Bell Squawk on: Description

[1] Disarming

Emits 2 squawks upon disarming

(default = disabled).

[2] Arming

Emits 1 squawk upon arming

(default = disabled).

[3] Auto-Arming

Emits 1 squawk every second for 60

seconds before Auto-Arming a partition.

Emits a series of 3 squawks every second

for 10 seconds before arming

(default = disabled).

[4] Exit Delay

Emits 1 squawk every second during the Exit

Delay. Emits a series of 3 squawks every

second during the final 10 seconds of the

Exit Delay (default = disabled).

[5] Entry Delay

Emits 1 squawk every second during the

Entry Delay (default = disabled).

[6]

Remote Arming/

Disarming

Emits 1 squawk upon arming and 2 squawks

upon disarming with a remote control (using

the Omnia Wireless System, OMN-RCV3

(default = enabled) .

Partition 1: [3124] Partition 3: [3324] Partition 5: [3524] Partition 7: [3724]

Partition 2: [3224] Partition 4: [3424] Partition 6: [3624] Partition 8: [3824]

Option Bell Squawk on: Description

[7] Bell Ring-back

Bell or siren emits 10 squawks

(default = disabled)

[8] Keypad Ring-back

Keypad emits 10 beeps

(default = enabled)

Partition 1: [3115] Partition 3: [3315] Partition 5: [3515] Partition 7: [3715]

Partition 2: [3215] Partition 4: [3415] Partition 6: [3615] Partition 8: [3815]

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 65 66

Komentarze do niniejszej Instrukcji

Brak uwag

SEKURE DGP2-641 Instrukcja Instalacji Strona 26

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa SEKURE DGP2-641