SEKURE DGP2-641 Instrukcja Instalacji Pobierz pdf (Strona 23)

IGIPLEX

NE C

ONTROL

ANEL

6.2.4 PGM Activation (Utility Key)

When option [3] is enabled, the keyswitch can activate a PGM. When a

keyswitch is defined with the PGM Activation option, the Keyswitch Partition

Assignment and Keyswitch Options are disabled. To program a Keyswitch

to activate a PGM:

1) Program the Activation Event of a PGM output with the Utility Key

Event corresponding to the desired keyswitch (see PGM

Programming Table in the Programming Guide: Event Group 048).

2) Enable option [3] in the section corresponding to the desired

keyswitch.

If the Utility Key events from 1 to 8 are chosen as Activation Events, the

PGM will activate whether the keyswitch or the keys on the keypad are

used. Utility Key events from 9 to 32 are only generated when keyswitches

from 9 to 32 with this option enabled are used:

6.3 K

EYSWITCH

ARTITION

SSIGNMENT

The control panel provides the option of partitioning the security system into

eight completely independent systems. Therefore, each keyswitch must be

assigned to one partition as shown in Figure 6-1 on page 20. For details on

Partitioning, see section 12.7 on page 35.

6.4 K

EYSWITCH

PTIONS

Each keyswitch zone can be programmed with one or more of the options

below as shown in Figure 6-1 on page 20.

6.4.1 Stay/Instant Disarm Option (Keyswitch)

When option [4] is enabled, the keyswitch can only disarm assigned Stay or

Instant Armed partitions. The Arm Only Option (see section 6.4.2) must be

disabled for this feature to function. When option [4] is disabled, the

keyswitch can disarm partitions armed using any arming method.

6.4.2 Arm Only (Keyswitch)

When option [5] is enabled, the keyswitch can arm assigned partitions, but

cannot disarm any partitions. The type of arming is determined by the other

Keyswitch Options selected.

6.4.3 Regular Arming (Keyswitch)

When options [6] to [8] are disabled, the keyswitch arming option will

default to Regular Arming (see section 16.1).

6.4.4 Stay Arming (Keyswitch)

Activating the keyswitch will bypass any zones defined as Stay Zones (see

section 5.5.3) in the selected partition. All other zones will remain activated.

For more information on Stay Arming, refer to section 16.2.

6.4.5 Force Arming (Keyswitch)

Activating the keyswitch will arm the selected partition bypassing any open

zones defined as Force Zones (see section 5.5.4) at the time of arming. For

more information on Force Arming, refer to section 16.4.

6.4.6 Instant Arming (Keyswitch)

This option is identical to Stay Arming except that all armed zones will

become Instant Zones (see section 5.3.4). For more information on Instant

Arming, refer to section 16.3.

Only one of the arming options (Stay, Force, Instant and Regular)

can be selected.

Utility Key

Event

Keypad Keyswitch

1 Keys [1] & [2] 1

2 Keys [4] & [5] 2

3 Keys [7] & [8] 3

4Keys [

CLEAR

] & [0] 4

5 Keys [2] & [3] 5

6 Keys [5] & [6] 6

7 Keys [8] & [9] 7

8Keys [0] & [

ENTER

9 to 32 --- 9 to 32

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 65 66

Komentarze do niniejszej Instrukcji

Brak uwag

SEKURE DGP2-641 Instrukcja Instalacji Strona 23

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa SEKURE DGP2-641