SEKURE DGP2-641 Instrukcja Instalacji Pobierz pdf (Strona 41)

IGIPLEX

NE C

ONTROL

ANEL

Enable or disable the options as required for each User Access Code as

shown in Figure 13-1.

13.6 P

ARTITION

SSIGNMENT

Each of the 998 User Access Codes can be assigned to one or more

partitions. Users can only arm, disarm and view the status of the partitions

assigned to their User Access Codes. Select one or more of the partitions

for each User Access Code as shown in Figure 13-1 on page 38.

If no partition assignment is selected, the User Access Code will

only be able to activate PGMs.

13.7 A

CCESS

ONTROL

In addition to the User Access Code options, the following options can be

programmed when Access Control is enabled: Access Level, Schedule,

Access Options and Access Card. For details on Access Control, see

section 14 on page 40.

The System Master Code and User Access Codes with the Full

Master feature enabled can also program the Access Level,

Schedule, Access User Options, and Access Card using another

method for programming.

The System Master Code has access to all doors all the time.

Only the card’s serial number and the choice of arming

method can be changed. If the other options are changed, the

System Master Code will revert to its original programming.

13.7.1 Access Level Assignment

User Access Codes can only open the doors included in their assigned

Access Level (see section 14.5 on page 40). In the first set of brackets,

enter the two-digit Access Level number (00 to 15, 00 = unrestricted) to be

assigned to that User Access Code.

13.7.2 Schedule Assignment

Schedules determine the hours, days and holidays that User Access Codes

can open the doors in their assigned Access Level (see section 14.6). In

the second set of brackets, enter the two-digit Primary Schedule number

(00 to 15, 00 = unrestricted) to be assigned to that User Access Code .

13.7.3 Access Control Options

The Access Control Options define how each Access Card can arm or

disarm the partitions. To arm the partition(s) assigned to the door, a valid

card is presented to the reader twice within approximately 5 seconds while

the door remains closed. For the card to be valid, it must be presented

during its assigned Schedule, within its assigned Access Level and be

assigned to the keypad’s assigned partitions depending on the Door

Access Mode (see section 14.10). Enable or disable the options as

required for each Access Card as shown in Figure 13-1.

13.7.4 Access Card Assignment

The Access Card is activated by assigning its serial number to the User

Access Code. Digiplex NE supports 26-bit Wiegand proximity cards and

readers (recommended: Position Technology’s CR-R880-A reader and CR-

R700 Series cards). Enter the serial number manually or present the

Access Card to the keypad’s reader and its serial number will register

automatically.

Option Feature Description

[1] [2]

OFF OFF

Master disabled

User cannot create or modify other User

Access Codes.

ON OFF

Master enabled

User can create new User Access Codes

with default options only, can program

PINs and User Labels.

ON ON

Full Master enabled

User can create or modify User Access

Codes with the same partition assignment

and program the User Options, Partition

Assignment (can assign only partitions the

Master Code has access to), Access

Control features, PINs and User Labels.

[3] Duress

A Duress enabled User Access Code can

arm or disarm the partition and can

immediately transmit a silent alarm to the

Monitoring Station.

[4] Bypass

User can program bypass entries as

described in section 16.6.

[5] Arm Only

User can arm assigned partitions, but

cannot Disarm.

[6] Stay or Instant Arm

User can Stay Arm or Instant Arm (see

section 16.2) assigned partitions.

[7] Force Arm

User can Force Arm assigned partitions

(see section 16.4)

[8] User Menu Access

Option [8] ON = User can access all its

assigned partitions, regardless of the

keypad’s partition assignment.

Option [8] OFF = User can only access the

partitions assigned to both itself and the

keypad.

Option Feature Description

[1] Activate Card

ON = Card assigned to the User Access

Code is activated and can be used when

Access Control is enabled.

OFF = Card is disabled, but the User

Access Code remains unaffected. This can

be used to disable a lost or stolen card

without deleting the User Access Code.

[2] Card can Disarm

Card can unlock Door and disarm assigned

partitions. User Option [5]: Arm Only must

be disabled for this feature to function.

[3]

Card with Extended

Unlocked Period

Card uses the Door Unlocked Period

Extension feature (see Digiplex/DigiplexNE

LCD Keypad and Access Control LCD

Keypad Reference & Installation Manual).

[4] [5]

OFF OFF

Arming Disabled Cannot arm partitions

ON OFF

Regular Arm Card can Regular Arm.

OFF ON

Stay Arm Card can Stay Arm.

ON ON

Force Arm Card can Force Arm.

[6]

Add Tolerance

Windows to

Schedules

Card and Code use the Schedule

Tolerance Windows (see section 9.3.3 on

page 30 and section 14.9 on page 41).

[7]

Code follows

Schedule

ON = Code is only valid during assigned

Schedule (see section 13.7.2).

OFF = Code is valid at all times.

[8]

Card to Unlock and

Code to Disarm

ON = A door contact must be installed on

the Door, the Door must be assigned to a

zone (section 5.1) and the zone defined as

an Entry Delay. A valid Card can unlock the

Door, but cannot disarm the partition. If the

partition is armed, the Entry Delay is

triggered and a User Access Code must be

entered to disarm the area. User Option [5]:

Arm Only and Access Control Option [2]:

Card can Disarm must be disabled for this

feature to function.

OFF = A valid Card can unlock the Door

and disarm the partition.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 65 66

Komentarze do niniejszej Instrukcji

Brak uwag

SEKURE DGP2-641 Instrukcja Instalacji Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa SEKURE DGP2-641