SEKURE DGP2-648 Instrukcja Instalacji Pobierz pdf (Strona 62)

60 REFERENCE & INSTALLATION MANUAL

Grade B Central Station (Level 0)

Same as Household Grade A Burglar alarm system unit except:

• The ringback feature shall be enabled (section [3037] option [5]; page 30).

• The model AB12M Bell and Bell Housing, manufactured by ADEMCO shall be

employed. Bell cutoff time shall be programmed for a minimum of 15 minutes (30

minutes for Canada).

• The Auto Test Report setting must be programmed to send a test transmission to

the central station at least once every 24 hours (section [3037] options [3] and

[4] on page 28 and section [3041] on page 28).

• Openings and closings must be reported to the central station. Report codes

shall be enabled.

• Model 278-0000-035 attack resistant enclosure must be employed.

Grade C Central Station (Level 0)

Same as Grade B Central Station except the Grade A Bell housing may not be

employed.

Grade A Local Alarm Units (Level 0)

Same as Grade B Central Station except:

• Bell test must be enabled.

Police Station Connect with Basic Line Security (Level 0)

Same as Grade B Central Station except:

• Openings and closings may not be reported to the central station.

Access Control System

• At least one model DGP2-641AC keypad shall be used with the system.

• The listed compatible model PosiProx reader shall be employed off the keypad.

Control of the Protected Premise

In order to have a UL certified system, the protected area is to be under the

responsibility of one ownership and management (i.e. one business under one name).

This may be a group of buildings attached or unattached with different addresses but

under the responsibility of someone having mutual interest. The person of mutual

interest is not the alarm installing company.

Bell Location

The alarm sounding device (bell) must be located where it can be heard by the person

or persons responsible for maintaining the security system during the daily arming

cycle.

Protection of the Control Unit

The local control unit and the local power supply must be protected by one of the

following ways:

• The control unit and audible alarm device must be in a protected area, which is

armed 24 hours a day.

• Each partition shall arm the area protecting the control unit and the audible

alarm device power supply. This may require duplicate protection armed by each

partition. Access to this protected area, without causing an alarm, will require

that all partitions be disarmed

In all cases described above, the protected area for the control unit must be

programmed as not bypassable.

CTR-21 Warnings

The equipment has been approved in accordance with Council Decision 98/482/EC for

pan-European single terminal connection to the public switched telephone network

(PSTN). However, due to differences between the individual PSTNs provided in

different countries, the approval does not, of itself, give an unconditional assurance of

successful operation on every PSTN network termination point. In the event of

problems, you should contact your equipment supplier in the first instance.

General Warning

This equipment must be installed and maintained by qualified service personnel only.

Warranty

Paradox Security Systems Ltd. (“Seller”) warrants its products to be free from defects

in materials and workmanship under normal use for a period of one year. Except as

specifically stated herein, all express or implied warranties whatsoever, statutory or

otherwise, including without limitation, any implied warranty of merchantability and

fitness for a particular purpose, are expressly excluded. Because Seller does not

install or connect the products and because the products may be used in conjunction

with products not manufactured by Seller, Seller cannot guarantee the performance of

the security system and shall not be responsible for circumstances resulting from the

product’s inability to operate. Seller obligation and liability under this warranty is

expressly limited to repairing or replacing, at Seller's option, any product not meeting

the specifications. Returns must include proof of purchase and be within the warranty

period. In no event shall the Seller be liable to the buyer or any other person for any

loss or damages whether direct or indirect or consequential or incidental, including

without limitation, any damages for lost profits stolen goods, or claims by any other

party, caused by defective goods or otherwise arising from the improper, incorrect or

otherwise faulty installation or use of the merchandise sold.

Notwithstanding the preceding paragraph, the Seller’s maximum liability will be strictly

limited to the purchase price of the defective product. Your use of this product signifies

your acceptance of this warranty.

*BEWARE: Dealers, installers and/or others selling the product are not authorized to

modify this warranty or make additional warranties that are binding on the Seller.

ATTACHMENT LIMITATION NOTICE

The Industry Canada label identifies certified equipment. This certification means that

the equipment meets certain telecommunications network protective, operational and

safety requirements. The Department does not guarantee the equipment will operate

to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be

connected to the facilities of the local telecommunications company. The equipment

must also be installed using an acceptable method of connection. The customer

should be aware that compliance with the above conditions may not prevent

degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian

maintenance facility designated by the supplier. Any repairs or alterations made by the

user to this equipment, or equipment malfunctions, may give the telecommunications

company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of

the power utility, telephone lines and internal metallic water pipe system, if present, are

connected together. This precaution may be particularly important in rural areas.

CAUTION: Users should not attempt to make such connections themselves, but

should contact the appropriate electrical inspection authority, or electrician, as

appropriate.

The Load Number (LN) assigned to each terminal device denotes the percentage of

the total load to be connected to a telephone loop which is used by the device to

prevent overloading. The termination on a loop may consist of any combination of

devices subject only to the requirement that the total of the Load Numbers of all of the

devices does not exceed 100.

Industry Canada certification is only applicable to installation of devices which include

transformers approved by the Canadian Standards Association (CSA).

DigiplexNE, WinLoad, NEware, Omnia and InTouch are trademarks or

registered trademarks of Paradox Security Systems Ltd. and its affiliates in

PosiPIN is a trademark or registered trademark of Position Technology Inc.

and its affiliates in Canada, the United States and/or other countries. All

rights reserved.

1 2 ... 57 58 59 60 61 62 63 64

Komentarze do niniejszej Instrukcji

Brak uwag

SEKURE DGP2-648 Instrukcja Instalacji Strona 62

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa SEKURE DGP2-648