SEKURE Paradox Digiplex DGP-610 Instrukcja Instalacji Pobierz pdf (Strona 32)

Digiplex DGP-NE96 - 32 - Programming Guide

Communication Settings

Account Numbers

Only the SIA format supports the [0] = 0 digit in its account numbers. Account numbers that use other reporting formats do not support

the [0] = 0 digit. Enter the [STAY] = A digit in its place. When using the SIA Format, and the Account Number Transmission (see option [6]

in section [3035] on page 30) corresponds to the partition, the control panel only uses the Partition 1 Account Number programmed in

section [3061], but the report code includes the partition number.

MSTN = Monitoring Station Telephone Number

* Option [6] in section [3035] is disabled.

†

Option [6] in section [3035] is enabled.

Reporting Formats

Timings

Section Data Description Default

[3050] __/__/__ (001 - 125, 128 - 253; 000 = Disabled)

Adding Values: 001 to 125 = [value] x [.008] (+0.008 to 1 sec.)

Subtracting Values: 128 to 253 = [value] - [127] x [-.008] (-0.008 to -1.008 sec.)

CLOCK COMPENSATION VALUE Disabled

[3051] __/__/__ (000 - 255) R

ING COUNTER 008

[3052] __/__/__ (000 - 255 x 4 seconds) A

NSWERING MACHINE OVERRIDE DELAY 32 seconds

[3053] __/__/__ (000 - 255 x 2 seconds) TLM

FAIL TIMER 32 seconds

[3054] __/__/__ (000 - 127 x 1 second) D

ELAY BETWEEN DIALING ATTEMPTS 20 seconds

[3055] __/__/__ (000 - 255 x 1 second; 000 = Instant Report) D

ELAY ALARM TRANSMISSION TIMER 000

[3056] __/__/__ (000 - 255 x 1 attempt) M

AXIMUM DIALING ATTEMPTS 8 attempts

[3057] __/__/__ (000 - 127 x 1 second) P

AGER DELAY BEFORE DATA TRANSMISSION 60 seconds

[3058] __/__/__ (000 - 255 x 1 minute; 000 = Instant Report) D

ELAY POWER FAILURE REPORT 30 minutes

[3059] __/__/__ (000 - 255 x 1 repeat; 000 = No Repeat) R

EPEAT PAGER REPORT CODE TRANSMISSION 000

Section Data - Hex Value (0000 - FFFF) Description Default

[3061] __/__/__/__ (if less than 4 digits, press [

ENTER])

CCOUNT NUMBER 1 (PARTITION 1* / MSTN 1

†

)

0000

[3062] __/__/__/__ (if less than 4 digits, press [ENTER])

CCOUNT NUMBER 2 (PARTITION 2* / MSTN 2

†

)

0000

[3063] __/__/__/__ (if less than 4 digits, press [ENTER])

CCOUNT NUMBER 3 (PARTITION 3 */ MSTN 3

†

)

0000

[3064] __/__/__/__ (if less than 4 digits, press [ENTER])

CCOUNT NUMBER 4 (PARTITION 4 */ MSTN 4

†

)

0000

[3065] __/__/__/__ (if less than 4 digits, press [ENTER])

CCOUNT NUMBER 5 (PARTITION 5* / N/A

†

)

0000

[3066] __/__/__/__ (if less than 4 digits, press [ENTER])

CCOUNT NUMBER 6 (PARTITION 6* / N/A

†

)

0000

[3067] __/__/__/__ (if less than 4 digits, press [ENTER])

CCOUNT NUMBER 7 (PARTITION 7* / N/A

†

)

0000

[3068] __/__/__/__ (if less than 4 digits, press [

ENTER])

CCOUNT NUMBER 8 (PARTITION 8* / N/A

†

)

0000

Section Description

[3070] ___ ___ ___ ___ R

EPORTING FORMATS FOR TELEPHONE NUMBERS 1 TO 4

Use the same format for each number. Only the pager format can be used with

other reporting formats.

For more information, refer to Automatic Report Code Programming on

page 41.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Komentarze do niniejszej Instrukcji

Brak uwag

SEKURE Paradox Digiplex DGP-610 Instrukcja Instalacji Strona 32

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa SEKURE Paradox Digiplex DGP-610