SEKURE 1686V Podręcznik Użytkownika Pobierz pdf (Strona 39)

Spectra LED Keypads 35

9.0 Appendix A

Your Spectra keypad can display data one of two ways

when you to program the following parameters :

• User Access Codes (see page 11)

• System’s Clock (see pages 7 & 23)

• Auto-Arm Time (see page 21)

Do not read the following if you have not read the

above mentioned sections.

After entering the 3-digit section you wish to program, the

[ENTER] button will flash. If a value is programmed, the

number corresponding to the first digit of the programmed

value will also illuminate. At this point, you can begin

entering the required data. After entering a digit, the

number corresponding to the following programmed digit

will illuminate and so forth. For example, if you wish to

change User Code 004 from 123456 to 454545, after

entering section [004], button [1] will turn ON. Press the

[4] button and button [2] will turn ON, then press the [5]

button and button [3] will turn ON.

After entering the desired 3-digit section and before

entering any data, press the [

ENTER] button to access the

Data Display Mode. The [ARM1], [ARM2] and READY lights

will flash. Once in the Data Display Mode, pressing the

[

ENTER] button will scroll through the digits of the current

section. When viewing the last digit in the section, pressing

the [

ENTER] button will automatically exit the section.

1686_EU08.fm Page 35 Wednesday, September 29, 2004 2:29 PM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Brak uwag

SEKURE 1686V Podręcznik Użytkownika Strona 39